News 3:

Page 1 2 3 4

Advanced Armament has developed a line of ultra-high-performance muzzle brakes for tactical and sporting applications where reduced recoil and fast follow-up shots are critically important. The BLACKOUT™ line of muzzle brakes has the same fast-attach feature found on Advanced Armament flash suppressors that enable users to install or remove a silencer in seconds using gross motor skills. When used in conjunction with a silencer, the BLACKOUT™ muzzle brake acts as an auxiliary blast chamber and protects the interior of the silencer from the erosive effects of unconsumed propellant-blasting. Each muzzle brake is constructed of heat treated stainless steel with a matte black SCARmor™ coating for additional surface hardness and corrosion resistance. BLACKOUT™ muzzle brakes are available in most popular thread patterns and are compatible with Advanced Armament fast-attach and Ratchet-Mount™ silencers. For more information, visit www.advancedarmament.com.

Command Arms Accessories (CAA) has introduced their new MGRIP1, a finger groove magazine grip that provides the operator with three ergonomic indentations for comfortable finger placement.  Since a significant number of shooters like to hold onto the magazine well to provide shooting stability CAA’s new ambidextrous grip provides a comfortable solution. Positioned at a balancing point on the rifle, the grip offers a comfortable no slip carry option and a plugged waterproof storage compartment for batteries or other small objects. On both sides of the grip are removable covers for the recessed pressure switch mounting channels. The lightweight 3.2 oz grip mounts to any Picatinny rail with a vice like screw-tightened clamping mechanism and provides the operator with a comfortable forward grasp.

TAPCO’s Intrafuse AR Handguard is designed to address the needs of every shooter – both civilian and tactical professionals.  Constructed of high- strength composite, this handguard is extremely durable and offers a 50% weight reduction over comparable aluminum systems.  The Picatinny rails  located at 3, 6, 9, and 12 o’clock enables the shooter to mount vertical grips, flashlights, and aiming lasers to their weapon.  Designed as a true modular system, our handguard includes covers for both the bottom rail and the side rails so you can configure the weapon to suit your needs.

Uncover the rails you need to use and leave the cover on for the ones you don’t.  Numerous ventilation holes provide plenty of air circulation to reduce barrel overheating.  Fits the standard carbine barrel configuration. Made in the U.S.A. Fits the AR15 and M4 Carbines.  Black, Dark Earth, OD. MSRP  $59.99.

Packaged in:

• Self-Standing or Hanging Trifold
• Cases of 20

Works with:

• AR15 / M4 Carbines
• Vertical Grips
• Optics
• Hand Guard Removal Tool

Command Arms (CAA) has introduced their new magazine well grip: The MGRIP2. It’s a two-piece grip that does not require a Picatinny rail for mounting. Just tighten the lightweight 3.2 oz grip around the magazine well and you have comfortable finger grooves and two removable covers for the recessed pressure switch mounting channels.  Once is ambidextrous grip is positioned at a balancing point on the rifle, it can provide the operator with a comfortable no slip carry option.

U.S. Cavalry now carries the lightweight and ultra-portable, Advanced Tactical Camera from Pacific Concepts.

The crucial record of events in any use of force scenario can prove disastrous if you aren’t armed with the unbiased eye of a video camera. Now video capability is portable! Weighing only 7 oz., including batteries, SD card and mounting, the Advanced Tactical Camera (ATC) is ready to attach to your weapon or helmet.

Anyone who has used a digital camera will be instantly familiar with the operation of the ATC. Using a 2Gb SD media card, the ATC can record an hour of VHS quality video (640 x 480 resolution) at 30 frames per second plus audio. Included cables allow you to download video straight to your computer or simply connect to a television and use the camera for playback. Two AA batteries provide up to 2 hours of capture time.

Although consumer video cameras of this type do exist, the ATC was engineered specifically for military and law customers to withstand the harsh recoil of weapon. Totally self-contained, the device is also waterproof up to 10 feet and offers protection against sand and other debris from internal O-rings.

The Advanced Tactical Camera is a perfect and inexpensive tool for training and accountability in real mission deployments. The ATC has already been put to use in a number of exciting ways, such as: cell extractions, high-risk warrants and less-lethal encounters. Additionally, it has been used by the military on the southern U.S border as well as in Afghanistan.

Designed and manufactured for Colt Defense, the Colt® CGL™ Foregrip Laser is a durable vertical pistol grip that incorporates a precision red laser and tactical navigation light. The Colt® CGL™ Foregrip Laser is designed to mount quickly and securely onto your AR-15, M-4, PDW, or any other black rifle. Available in Blue, Red or White LED Navigation Light for an MSRP of $399.00.  Visit LaserMax for more information.

After a tremendous amount of research and testing by Bill Wilson and the Wilson Combat team, the company has come out with custom AR platform rifles chambered in 6.8 SPC caliber.

The 6.8 SPC (6.8×43mm) was developed by the United States Army Marksmanship Unit to offer superior downrange lethality over the 5.56 NATO/.223 Remington in an AR pattern service rifle, with minimal loss of magazine capacity and a negligible increase in recoil.

Boasting outstanding accuracy and reliability, the 6.8 SPC is capable of pushing a .277 caliber, 85gr bullet to over 2900 FPS with their match-grade, Spec II chambered 16” barrels. Appropriate hand loading can achieve even higher velocities and enable the use of heavier projectiles up to 130 grains, dramatically improving terminal ballistics over a 5.56 Nato/.223 Remington at long range.

This added ballistic performance makes the 6.8 SPC perfect for home protection and SRT/SWAT teams. For more information and images, visit www.wilsoncombat.com/h_hog3.asp

FEATURES

• Wilson Combat forged 7075 flat top upper receiver, marked 6.8 SPC II
• Wilson Combat forged 7075 lower receiver
• Stainless medium weight (.740” at the muzzle) match grade barrel with 4 groove / 1-11 twist, SPC II chamber, M4 feedramps, 16” or 18”
• Mid-length gas system, with lo profile gas block
• LMT enhanced bolt and carrier with NP3 coating
• Wilson Combat quadrail
• Wilson Combat Accu-Tac flash hider, 5/8”-24
• Wilson Combat single stage TTU (tactical trigger unit) approx 4# pull
• MAGPUL CTR butt stock and MIAD pistol grip with tactical trigger guard
• Armor Tuff polymer finish in black, green, grey or tan
• One C-Products 15 round magazine
• Carry sling
• Wilson Combat nylon assault case

Available Options:

• TR-WCR68-16 Wilson Combat Recon 6.8 SPC 16″ $2,350
• TR-WCR68-18 Wilson Combat Recon 6.8 SPC 18″ $2,350
• TR-WCR68UP16 Complete Wilson Combat Recon 6.8 SPC Upper 16” $1,025
• TR-WCR68UP18 Complete Wilson Combat Recon 6.8 SPC Upper 18” $1,025

Developed by DPMS with Paul Howe of Combat Shooting and Tactics, the CSAT Perimeter and Tactical rifles in 5.56×45mm offer users a pair of top-end, limited-edition tactical AR carbines.

Sporting 16” barrels, the primary difference between the two variants is the Perimeter’s heavier contour barrel as compared to the Tactical’s lighter AP4-countour M4-style barrel.

Both carbines feature four-rail free-floated fore-ends and six-position Magpul CTR collapsible stocks. Mated to the fore-ends is a LaRue offset flashlight mount and a Novatac 120T-O tactical flashlight as well as a Midwest Industries rail-mounted sling swivel.

Working in concert with the carbines’ fixed front sight posts is a full-featured detachable rear sight assembly mounted on the A3-style flat-top upper receivers. The rear sight sports the XS Sights CSAT aperture with an ingeniously simple CQB notch cut in its aperture designed for use at 7 yards.

Both carbines feature laser-engraved CSAT markings on the right side of the magazine well on their lower receivers.

MSRP of both carbines is $1,799.

Exclusive distribution of both carbines is by RSR and CSAT. For more information on DPMS, visit www.dpmsinc.com.

MEGA MACHINE SHOP Billet Uppers & Lowers

These Mega Machine Shop billet uppers & lowers have been designed for a truly unique look and are machined from billet 7075-T6 aluminum instead of the more commonly used 6061 for a 70% increase in strength. Featuring an integrated trigger guard for added functionality, and strength and a magwell that has an enlarged bottom flare and inner chamfer for easier clip insertion. The Lug Angle at the shell deflector has been altered to 60.0° for increased effectiveness and the upper receiver has been re-designed to incorporate increased wall thicknesses for added strength. A butt stock attachment feature is fortified for added strength in high power applications. The billet charging handle features a new anti-slip surface for improved grip and the entire piece is Black Hard anodized with a surface hardness of 60 Rockwell.  For more information on this and other Mega Machine Shop products.

Weaver has come out with a new tactical line of riflescopes for the precision shooter. The new Tactical Series (MSRP: $890.95 - $994.49) includes two magnification options and is currently available in stores now.

These new tactical scopes are manufactured to the strictest tolerances in order to perform in the harshest environments. From rugged one-piece construction and waterproof/shockproof/fogproof performance to argon purged tubes and fully multi-coated lenses with extra hard exterior coatings, these new tactical scopes help deliver precise shot placement under adverse conditions.

Other factors that establish these new scopes as serious contenders in the tactical market include:

• Powerful 5 time magnification
• First focal plane reticles
• 30mm tubes
• Side focus parallax adjustment

Serious shooters will also appreciate the reset-to-zero turrets and Mil Dot reticle as they choose between the 4-20×50mm or 3-15×50mm offerings in matte finish.

For more information on this product, visit www.weaveroptics.com.

GG&G Spring Actuated Flip Up Front Sight

GG&G’s new Spring Actuated Flip Up Front Sight For Tactical Forearms has been redesigned to be lighter in weight and quicker in deployment.  Although specifically designed to provide the correct sight height when mounted on a tactical forearm, the sight can also be installed on gas blocks that are the same height as the upper receiver. During the redesign process, GG&G developed a less expensive method to CNC machine the components which allows for a reduced MSPR while remaining built to quality standards here in the US.

With just a push of a button, the front flip up sight can be quickly deployed on target.  The sight not only springs into an on target position, but solidly locks into the deployed position, preventing accidental depression of the sight during a tactical situation.

Another push of the button and the sight is free to be folded into the locked down position.  The sight actuator button has been located on the left side of the sight, facilitating easy operation with the off hand, leaving your fire control hand in the proper tactical position—near the trigger.

Not only is the sight set for use on the AR-15, but will co-witness when mounted to the tactical forearm of an AR-10.  The sight stem has been designed to fold rearward.  The dovetail interface can be easily installed with the included wrench.

As an option, a Trijicon Tritium AR-15 Front Sight Post can be ordered with the sight for increased accuracy in low light operations.  This tritium front sight option is the perfect addition for police and tactical users who may be moving in and out of darkness in real time.

For more information on this and other GG&G products, visit www.gggaz.com.

Next Generation Arms X7 AR-15

The new X7 is the 7th “next generation” of continually improved AR-15 by NGA. As is by now an NGA trademark, ceramic coatings are applied to the entire inside and outside of the gun for permanent, oil-free lubrication, easy cleanup and total corrosion-proofing resulting in 4 beautiful two-tone color schemes. The ceramics have been improved for lower friction in the X7. Nextgenerationarms.com; (208) 714-4220

• 6.6lb weight, 7075 T6 billet lower receiver and forend
• ergonomic design for improved operator performance
• continuous flat top MS1913 rail
• 4 stainless steel, polygonal rifled barrel options, all sub MOA
• faster, more reliable magazine reloading with low friction,
flared mag well and new design mag catch
• improved buffer system with engineered, stronger, long-life
chrome-silicon spring with increased operating margin
• sound and flash reduced, neutral muzzle flip compensator
• price: $1950 - $2810 (depending on options)
• warranty: guaranteed for your lifetime